Description
| Output Specification | ||
| Outputs Per Module | 8 Points | |
| Indicators | 8 Green Output States, 1 Green/Red Fn-Bus State | |
| Relay Type | Form A, normally Open Single Pole, Single Throw |
|
| Output Range | 5~28.8Vdc @2.0A Resistive 48Vdc @0.8A Resistive 110Vdc@0.5A Resistive 250Vac @2.0A Resistive |
|
| Min. Load | 100uA, 100mVdc Per Point | |
| Max. On-state Voltage Drop | 0.5V @ 2.0A, Resistive Load, 24Vdc | |
| OFF-State Leakage Current | Max. 1.5mA | |
| Output Signal Delay | On to Off : Max. 10ms, Off to On : Max. 10ms |
|
| Initial Contact Res. | 20mΩ | |
| Expected Contact Resistance | 300K Cycles Resistive, 100K Cycles Inductive | |
| Common Type | 1 Points / 1 COM | |
| General Specification | ||
| Power Dissipation | Max. 235mA @5.0Vdc | |
| Isolation | I/O to Logic : Relay Coil/Contact Isolation / 1250 Vrms tested | |
| Field Power | No Connection with Field Power / Field Power passes through to the next module | |
| Wiring | I/O Cable Max. 2.0㎟(AWG 14) | |
| Weight | 200g | |
| Module Size | 24mm x 99mm x 70mm | |
| Signals for Left Terminal | Pin No. | Description |
| 0 | Output Channel 0_A | |
| 1 | Output Channel 1_A | |
| 2 | COM 0 | |
| 3 | COM 1 | |
| 4 | Output Channel 2_A | |
| 5 | Output Channel 3_A | |
| 6 | COM 2 | |
| 7 | COM 3 | |
| Signals for Right Terminal | ||
| 0 | Output Channel 4_A | |
| 1 | Output Channel 5_A | |
| 2 | COM 4 | |
| 3 | COM 5 | |
| 4 | Output Channel 6_A | |
| 5 | Output Channel 7_A | |
| 6 | COM 6 | |
| 7 | COM 7 | |
